Crude palm oil level measurement successful application case
According to the crude palm oil level measurement project we have installed,
We have summarized the following experience,
Our magnetostrictive level sensor is stable in the measurement of CPO, with high accuracy and long life.
It can measure oil level, water level and temperature at the same time.
Palm oil is squeezed from palm fruit.
After refining and fractionating palm oil, products with different melting points can be obtained.
They are widely used in the catering industry, food industry and oleochemical industry.
People can obtain crude palm oil (CPO) from palm pulp through the process of boiling, crushing, and squeezing.
Aiming at the characteristics of crude palm oil (CPO),
Our magnetostrictive probe and floats have been customized,
It can well meet the level measurement of crude palm oil (CPO).
flexible magnetostrictive level sensor for Crude palm oil (CPO)
Due to the large amount of impurities and high viscosity of crude palm oil (CPO),
Our flexible magnetostrictive probe can use PTFE outer tube.
In this way, the float will not be stuck, and the flexible probe can work stably for a long time.
The outer tube made of PTFE has good corrosion resistance.
Crude palm oil (CPO) needs to be heated in the storage tank,
Therefore, there is a high demand for temperature measurement.
Our flexible probe has 5 temperature sensors, and the position of these 5 temperature points can also be customized according to customer needs.
Flexible probe temperature sensor measuring range -40 to 120 degrees.
The PTFE outer tube can withstand a high temperature of 300 degrees.
Therefore, the flexible magnetostrictive probe of the PTFE outer tube is very adaptable when measuring CPO.
The magnetostrictive probe can measure the oil level, water level and temperature at the same time, and the signal is transmitted to the system in real time.
The signal is rs485 Modbus, and the transmission distance is about 1000 meters.
If you only need to measure the oil level, you can take out the water float, leaving only one oil float.
Parameters:
Measuring range: 0.3~25m
Measuring precision:±1mm
Resolution:0.1mm
Temperature measuring number:5
Temperature measuring range:-40~125°C
Temperature measuring precision:±0.5°C
Temperature measuring resolution:0.0625°C
Working temperature:-40~85°C
Medium density range: 0.4~2.5g/cm3
Working pressure:0.05~10MPa
Protective Grade Explosion-proof label:IP67/Exia II CT6
Technics interface:G3/4″ or M20×1.5
Electric interface:G1/2″ or M20×1.5
Working voltage:DC12~24V
Working current:40mA
Communication protocol: Modbus RS485
Material of the probe Rod and floater:316L or PTFE
If you have a crude palm oil (CPO) level measurement project,
Please feel free to send us an inquiry,
Our engineers can quote you and provide solutions.
sales@xtsensors.com
Related Products:
Magnetostrictive level transmitter
Crude oil tank level measurement